Qualifies for 30-day return policy

Canique Smartmeter Sense can use an infrared adapter to read, decode and decrypt consumption data from the smart meter and send it wirelessly to a base station.

Compatibility

You need this infrared measuring head to communicate with your smart meter

• Canique Infrared measuring head (Ultra Low Power)

You need one of these base stations to relay messages to the internet or your network

• Canique Pico Gateway
• Raspberry Pi + Canique Radio Hat

Compatible with these smart meters

• ISKRAEMECO AM550
• SIEMENS IM350
• Landis+Gyr E450

Smart meter Password

Please enter your smart meter password when ordering so that your Smartmeter Sense can be sent to you fully configured.

You will receive the smart meter password from your network operator.

In the case of Wiener Netze, for example, go to https://smartmeter-web.wienernetze.at/, switch to the ‘Anlagendaten’ menu, click on ‘Bearbeiten’ for your meter and activate the ‘Benutzerschnittstelle’. Activation can take several weeks. As soon as your customer interface is activated (i.e. as soon as the infrared LED on your smart meter goes on), you can click on ‘Schlüssel anzeigen’. The key displayed is your smart meter password.

Radio message format

The standard format transmits your consumption (watts and watt hours). Select this format if you do not have a solar system.

The extended format transmits, in addition to the values of the standard format, how much energy you feed into the power grid (watts and watt hours). Select this format if you also want to transmit the feed-in of your solar system.

Please note that, as of October 2024, even if the feed-in is transmitted, this data is not displayed in the Canique web interface of the Pico Gateway. Currently you can only see consumption data. However, the feed-in data is available via MQTT.

Transmission Interval

The standard transmission interval is 15 seconds, i.e. your current consumption and your total consumption are captured and sent every 15 seconds. If you want a different interval, you can specify this on request.

Specs

• Frequency band: 868 MHz
• Hardware Revision: 1.4.x
• Battery life time: 5 years (assuming 15 seconds TX interval)
• Measurement/Transmission interval: 15 seconds
• PCB dimension: 84 x 25 mm
• Drill hole size for screws: M2

More about Smartmeter Sense

• Product Page
• Datasheet

Screw terminal

• 4 pin UART terminal: VCC, GND, RX, TX
• supports wires with AWG 26-18
• supports 4-5 mm stripped wires
• 2.54mm pitch
• M1.6 screws
• supports up to 2m cable length (max 400pF)

Battery

The battery (1 AA battery) is not included, but can be ordered separately in our shop:

• Energizer Industrial LR06 Batterie

Enclosure

The enclosure is manufactured using the 3D printing process.

The standard enclosure may have colour deviations, i.e. it is not homogeneously grey.

The housing printed using the SLS process has a texture, is homogeneously grey and looks very elegant.

What you get

• Canique Smartmeter Sense with installed screw terminal
• 3D printed enclosure in grey
• external antenna 868 MHz
• 4 screws to close the enclosure